TMS 2020 Annual Meeting & Exhibition

11:20 AM–11:40 AM

Feb 24, 2020

(US - Pacific)

Additive Technologies

Effect of Print Processing Parameters on the Green Part Properties and Densification Behavior in Binder Jet 3D Printed Co-Cr Biomaterials

San Diego Convention Ctr - 7A

11:20 AM–11:40 AM

Feb 24, 2020

(US - Pacific)

Additive Technologies

Uncertainty Quantification in Additive Manufacturing from CALPHAD to ICME Models

San Diego Convention Ctr - 6F

2:30 PM–6:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

Additive Manufacturing Keynote Session: Additive Manufacturing Keynote Session

San Diego Convention Ctr - 6A

2:30 PM–2:35 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

Introductory Comments

San Diego Convention Ctr - 6A

2:35 PM–3:05 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

Roles of Thermal Cycles in The Microstructure and Property Controls in Low-alloy High Strength Steels

San Diego Convention Ctr - 6A

3:05 PM–3:35 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

Microstructural Control for Additive Manufacturing—An Advanced Microscopy Approach

San Diego Convention Ctr - 6A

3:35 PM–4:05 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

Texture and Anisotropy in Metals Additive Manufacturing

San Diego Convention Ctr - 6A

4:05 PM–4:25 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

Break

San Diego Convention Ctr - 6A

4:25 PM–4:55 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

TMS Young Innovator in the Materials Science of Additive Manufacturing Award: Innovation in Additive Manufacturing: A Perspective on an Early Career in Metal Alloy Development

San Diego Convention Ctr - 6A

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-100: Effect of Thermal History on Elastic Strain and Microstructural Evolution in Additive Manufacturing

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-101: Effects of Laser-energy Density and Build Orientation on the Defect Structure, Microstructure and Tensile Properties of Laser Powder Bed Fused Inconel 718

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-103: Effects of Process Parameters on Microstructure and Mechanical Properties of Wire Arc Additive Manufactured Al-Mg-Si Alloy

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-104: Effects of the Energy Density and Building Angle on the Tensile Properties of SLM Ti-6Al-4V Alloys

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-105: Evolution of Dislocation Cell Substructure and its Effect on Precipitation Behavior in AM-IN718

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-106: Experimental Study on the Laser Cladding of T15 Coating for 42CrMo Steel

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-107: Fabrication of \\947;/\\947;’-strengthened Co-Al-W Alloys by Direct Laser Deposition

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-108: Gamma-titanium Intermetallic Alloy Produced by Selective Laser Melting Using Mechanically Alloyed and Plasma Spheroidized Powders

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-109: Heat Treatment of Wire+Arc Additively Manufactured Bimetallic Structures

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-10: Microstructure, Mechanical Properties, and Fatigue Damage Mechanisms in Laser Powder Bed Al-10Si-0.4Mg Alloys

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-110: Influence of Print Orientation on Microstructure and Mechanical Performance of Selective Laser Sintered Polyamide-12

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-111: Influence of the Partial Pressure on the 316L Stainless Steel fusion with the Selective Laser Melting Process

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-112: Influence of the Process Parameters on the Densification and Microstructure of Ni-based Superalloys with Different Amount of γ Former Alloying Elements Processed by Laser Powder Bed Fusion

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-113: Investigation of Martensite α’ Phase Transformation during Heat Treatment of High Speed Selective Laser Melted Ti6Al4V Components

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-114: Investigation of the Effect of Beam Scan Strategies on the Microstructure of EBM Additively Manufactured Inconel 738 Builds

San Diego Convention Ctr - Sails Pavilion

5:30 PM–7:00 PM

Feb 24, 2020

(US - Pacific)

Additive Technologies

A-115: Investigation of the Effect of Process Parameters on the Microstructural Evolution and Mechanical Properties of Inconel 718 Additively Manufactured in Direct Metal Laser Melting (DMLM) Process

San Diego Convention Ctr - Sails Pavilion

All Sessions